Qty: 1
$80.10
- BFCM 2026 10% OFF (- $8.90 )
$7.00
Our cam tab alignment tools are designed to help perfectly align your new KPO cam tabs to your frame. We use the same tools in our own shop and have proven they make installing your cam tabs much quicker and easier than trying to align the plates by hand! These tools are 3D printed in house out of PLA and are designed for TACKING the cam tabs onto the frame only. DO NOT leave the tool installed while fully welding the cam tab plates to your frame.
Each platform uses different cam tab sizes, with most platforms using multiple sizes per vehicle. Here is a helpful chart on what's included with each platform:
96-02 4Runner, 95-04 Tacoma, 00-06 Tundra, 01-07 Sequoia:
03-09 4Runner / GX470, 05-15 Tacoma, 07-09 FJ Cruiser:
10-24 4Runner / GX460, 16-23 Tacoma, 10-14 FJ Cruiser:
07-21 Tundra, 08-22 Sequoia:
All Models (intended for shops who install multiple models):
When welding on your new cam tabs, it is important that they align perfectly with the slot on your frame. If the slots are not aligned the LCA bolt will not be able to fully seat in one direction or the other. We designed these tools to be as quick and easy to use as possible while ensuring the slots align perfectly during install. Consult the photos above and the list of directions below:
Disclaimer: Cam tabs should be installed by a shop with off road/welding experience only. Designed for KPO cam tab plates; using with other brands may require modification.